Dell E310dw User Manual page 179

Interface Select
Auto IF Time
Input Buffer
Replace Toner -
Print Menu
Level 1 Level 2
Auto Continue -
Media Type -
Paper -
Copies -
Orientation -
Print Position X Offset
Y Offset
Auto FF -
PCL Setting Font No.
Font Pitch
Font Point
Symbol Set
Table Print
Auto LF
Auto CR
Auto WRAP
Auto SKIP
Left Margin
Right Margin
Top Margin
Bottom Margin
Lines
Select the interface to use.
If you choose Auto, the machine automatically changes the interface to USB
or Ethernet depending on which interface is receiving data.
You must set the time-out period for the auto interface selection.
Increases or decreases the input buffer capacity.
Sets the machine to continue printing after the LCD displays Replace
Toner
Description
Select this setting if you want the machine to clear paper size errors.
Sets the type of paper.
Sets the size of paper.
Sets the number of printed pages.
This machine can print pages in portrait or landscape orientation.
Moves the print start position (at the top-left corner of pages) horizontally
up to -500 (left) to +500 (right) dots in 300 dpi.
Moves the print start position (at the top-left corner of pages) vertically up
to -500 (up) to +500 (down) dots in 300 dpi.
Allows the machine to print any remaining data automatically.
Sets the font number.
Sets the font pitch.
The Font Pitch menu will appear when you choose I042 to I054 in
Font No. setting.
Sets the font size.
The Font Point menu will appear when you choose I000 to I041 in
Font No. setting.
Sets the symbol set or the character set.
Prints the code table.
ON: CR -> CR+LF, OFF: CR -> CR
ON: LF -> LF+CR, FF -> FF+CR, or VT -> VT+CR
OFF: LF -> LF, FF -> FF, or VT -> VT
Chooses whether a line feed and carriage return will happen when the
machine reaches the right margin.
Chooses whether a line feed and carriage return will happen when the
carriage position reaches the bottom margin.
Sets the left margin at column 0 to 70 columns at 1 cpi.
Sets the right margin at column 10 to 80 columns at 1 cpi.
Sets the top margin at a distance from the top edge of the paper.
Sets the bottom margin at a distance from the bottom edge of the paper.
Sets the number of lines on each page.
Machine Settings 179