Table of Contents
Advertisement
User Guide
Installing or Removing DIMM
DIMM
The DIMM (Dual Inline Memory Module) is installed in a DIMM socket on the mother
board installed in the server.
The motherboard contains six pair of sockets in which DIMMs are installed. At least
two DIMMs are installed in DIMMs #11 and #21. (The DIMMs normally installed may
be replaced.)
DIMMs are installed on the sockets in the ascending order of DIMM socket numbers in
the unit of two modules DIMMs.
#33
#32
#31
#23
#22
#21
#13
#12
#11
#43
#42
#41
■
The DIMM is easily affected by static electricity. Handle the
DIMM after making your body contact with a metallic frame
section of the server to discharge the static electricity on
your body. Do not make bare hands contact with terminals
and components on the DIMM. In addition, do not put the
DIMM on a desk directly. See "Static Precautions" for details
of the static electricity.
■
Do not use any DIMM not approved by the manufacturer. If
an unapproved third party's DIMM is installed in the server,
not only the DIMM but also the server itself may be defec-
tive. You will be charged by any repair of a malfunction or
defect caused by such a device within the warranty period.
Caution
170
www.nec-computers.com
Advertisement
Table of Contents
