Table of Contents
Advertisement
3. S
ETUP
Mounting
Orientation
This fixture may be mounted in any safe position, provided there is adequate room for ventilation.
Rigging
It is important never to obstruct the fan or vents pathway. Mount the
fixture using, a suitable "C" or "O" type clamp. Adjust the angle of
the fixture by loosening both knobs and tilting the fixture. After finding the
desired position, retighten both knobs.
When selecting installation location, take into consideration access and
routine maintenance.
Safety cables must always be used.
Never mount in places where the fixture will be exposed to rain, high
humidity, extreme temperature changes or restricted ventilation.
Operation
C
F
ONTROL
UNCTION
Laser rotation button
Laser rotation speed knob
Laser red strobe knob
Laser green strobe knob
LED rotation button
LED rotation speed knob
LED brightness knob
Note!
The lasers cannot be turned off. They can be set to a slow strobe.
Note!
At higher rotation speeds, the operation noise may increase from the fixture.
This is normal.
Eclipse™ User Manual
D
ESCRIPTION
Push in=rotate counterclockwise
Push out= rotate clockwise
Turn clockwise to increase the rotation of the
laser effect
Turn clockwise to increase the strobe speed of
the red laser from slow to full on
Turn clockwise to increase the strobe speed of
the green laser from slow to full on
Push in=rotate counterclockwise
Push out= rotate clockwise
Turn clockwise to increase the rotation speed of
the deep blue LED effect from static to full
speed
Turn clockwise to increase the intensity of the
deep blue LED effect from off to full on
10
Hanging Clamp
Note!
Clamp is sold separately.
5/21/2009 5:12 PM
Advertisement
Table of Contents
