Honeywell Bioptic Aux Port Configuration
Scan the following Plug and Play code to program the scanner for a Honeywell
bioptic scanner auxiliary port configuration. This bar code sets the baud rate to
38400 bps and the data format to 8 data bits, no parity, 1 stop bit.
Datalogic™ Magellan
Configuration
Scan the following Plug and Play code to program the scanner for a Datalogic
Magellan bioptic scanner auxiliary port configuration. This bar code sets the
baud rate to 9600 bps and the data format to 8 data bits, no parity, 1 stop bit.
NCR Bioptic Aux Port Configuration
Scan the following Plug and Play code to program the scanner for an NCR biop-
tic scanner auxiliary port configuration. The following prefixes are programmed
for each symbology:
Symbology
UPC-A
UPC-E
EAN-8
EAN-13
Honeywell Bioptic Settings
©
Bioptic Aux Port
Datalogic Magellan Bioptic Settings
Prefix
A
E0
FF
F
NCR Bioptic Settings
Symbology
Code 39
Interleaved 2 of 5
All other bar
codes
Prefix
B1
B2
B3
2 - 7