Creating A Waypoint - Magellan FX324 MAP Manual

Return to the List of Waypoints
Select with the button and push Enter to display the list of waypoints
again.
Activating a Waypoint
Select using the button and push Enter to activate the waypoint.
See Moving Toward a Waypoint and Following a Route.
Modifying a Waypoint
Select using the
waypoint and modify the desired fields. The procedure is similar to the
one for creating a waypoint.
See Creating a Waypoint.
You must select using the
modifications you have made to the waypoint.
The date and the time of the modifications are automatically recorded.
Note: An active waypoint or a waypoint used in a route cannot be
amended. This is also true for the *ANCHOR and *MOB
waypoints.
Deleting a Waypoint
Select using the
confirmation message is displayed. Select Yes and push Enter to delete
the waypoint or select No and push Enter to return to the menu without
deleting it.
Note: An active waypoint or a waypoint used in a route cannot be
deleted. This is also true for the *ANCHOR and *MOB
waypoints.

Creating a Waypoint

There are three ways to create a waypoint: from the WPT menu, using the
Mark button, or in Cursor mode.
The Create option lets you manually create a new user waypoint.
Menu WPT Tab
button and push Enter to display the data for a
button and push Enter to save the
button and push Enter to delete the waypoint. A
2-Create Waypoint
51