Selecting Contrast; Selecting Alarm/Message; Accessing The Alarm/Message Menu - Magellan GPS Tracker User Manual

Selecting Contrast

You may want to change the contrast of your receiver. You can adjust the
lightness or darkness depending on your preference.
From any NAV screen, press MENU, high-
light CONTRAST and press ENTER. A
pop-up window will be displayed. Use the
LEFT/RIGHT ARROWs to adjust the
contrast and press ENTER.

Selecting Alarm/Message

Accessing the Alarm/Message Menu

While navigating, you may decide to set an alarm in your GPS Tracker. The
GPS Tracker has four types of alarms: Anchor alarm, which will notify you
when your anchored boat has drifted; Arrival alarm, which will notify you
when you are within the arrival circle of your destination; XTE alarm, which
will notify you when you have gone off course; and Proximity alarm which
will notify you when you are within the proximity of any waypoints you have
chosen.
From any NAV screen, press MENU and highlight ALARM/MSG. A
screen will appear with your choice of alarms and messages. Use the
UP/DOWN ARROWs to highlight your choice and press ENTER.
Sample. When the pop-up window for an alarm is
displayed, the distance and a message, if there are
any available, will appear. A sample is shown.
Magellan GPS Tracker
WPT NAMES WPT NAMES CONTRAST
OFF
ON
WPT NAMES WPT NAMES
ATTENTION
P
WPT001 IS
OFF
F
WITHIN 100
ON
T
ROCKS ON
LEFT
47