Selecting Temp Units And Calibration In Your Status Screen - Magellan GPS Tracker User Manual

Selecting Temp Units and Calibration in your Status Screen

You have two options for customizing the
STATUS screen, TEMP UNITS and
TEMP CALIB. Press MENU to display
the STATUS screen menu. Use the UP/
DOWN ARROWs to make your selection
and press ENTER. The other menu items
displayed will be discussed later in this
manual.
Setting Temperature Units. After
selecting TEMP UNITS from the STA-
TUS screen menu, you can choose from
Fahrenheit or Celsius. Use the UP/
DOWN ARROWs to highlight your
choice and press ENTER.
Setting Temperature Calibration. The GPS Tracker comes with a
factory default setting that can be changed to accommodate the
environment that you are in. This enables the user to calibrate the
temperature creating an offset from the factory setting.
After selecting TEMP CALIB from the
STATUS screen menu, press ENTER to
turn the cursor on, allowing you to change
the temperature. Use the ARROWs to
change the temperature and press ENTER
to exit the edit mode.
Use the UP/DOWN ARROWs to highlight SAVE EDITS which
will save your changes or highlight RESET DFLT which returns the
temperature offset to its factory defaults. Press ENTER to return to
the STATUS screen saving your changes. Press QUIT to return to
the STATUS screen without saving changes.
Magellan GPS Tracker
MENU
TEMP UNITS
TEMP CALIB
WAYPOINTS
ROUTES
SETUP
SUN/MOON
FISH/HUNT
CONTRAST
ALARM/MSG
TEMP UNITS
FAHRENHEIT
CELSIUS
TEMP CALIB
TEMP
25
˚
c
SAVE EDITS
RESET DFLT
15