Selecting A Destination - Magellan RoadMate Series User Manual

Selecting a Destination

Creating a Destination to an Address
To begin creating an address, enter the city by:
• entering the name of the city
• entering the ZIP code for the city
• selecting a previously used city.
1. Tap from the Main Menu.
2. Enter City:
You can do this in three ways:
Tap to select the city from the list of
previous cities.
Use the keyboard to enter the first few
characters of any significant word in the
city name to select a new city. If the city
you're searching for appears in the top
field, tap on the city name or
Tap List button to bring up a list of
cities that begin with the characters you
entered. Tap to select the city from the
list.
Tap Zip Code to switch to the numeric
keyboard and enter the ZIP code. Tap to
bring up a list of cities with the zip code
entered.
3. Enter the Street name.
With the city selected, the keyboard will
be displayed, prompting you for the street
name.
Use the keyboard to enter the street
name. Enter the first few characters of
any word in the street name, and tap
or continue entering characters until the
list of streets is displayed.
4
Note: You do not need to enter accented
characters.
4. Tap on the street name from the list.
5. Enter Street number:
Use the keyboard to enter the street
number for the address. The range of
acceptable street numbers is displayed
.
before you start typing. Tap
street number is complete.
The GO screen appears with:
• address of the selected location
• the estimated time of arrival (ETA)
• routing method (e.g. Fastest Time).
distance to travel
when the