Basic Operation
Power Up Sequence
The receiver is powered up by pressing PWR
(power). On power up, the GPS Tracker will
display the Magellan logo/start up animation
momentarily and then switch to the STATUS
screen. The receiver begins searching the sky
for satellites and begins the process of comput-
ing a position fix.
Navigation Screens
The nine NAV (navigation) screens (STATUS, POSITION, NAV 1, COM-
PASS, NAV 2, PLOT, ROAD, SPEED and TIME ) provide you with neces-
sary information you will need to use the GPS Tracker as a navigational tool.
NAV screens can be viewed by pressing NAV from any screen. You can scroll
through the NAV screens by repeatedly pressing NAV or the UP/DOWN
ARROWs from any NAV screen.
All screens, except the STATUS and POSITION screens, can be disabled by
turning them off in the NAV SCREENS portion of SETUP.
Magellan GPS Tracker
3
MAGELLAN
TRACKER
13