Optional Setup Functions; Basic Operation - Magellan Meridian series Quick Start Manual

The Satellite Status screen is displayed and the Meridian
begins acquiring the data from the satellites. Once the first
position fix has been computed you can begin using all of
the functions found in your Meridian GPS receiver.

Optional Setup Functions :

There are two additional options that you may want to set up prior to using
your Meridian GPS receiver. Contrast and NAV Units.
Contrast. To set the contrast, press
highlight "Contrast " and press
Use the Left/Right arrows to change the contrast to a level
that provides the best display of the four bars displayed
below the slide bar.
contrast , press
NAV Units. You can select the units of measure that Meridian will use;
Miles/Yards/MPH, Miles/Feet/MPH (default), Nautical Miles/Feet/Knots or
Kilometers/Kilometers per hour.
To change the Nav Units of Measure press
Up/Down arrows to highlight "Setup" and press
the Up/Down Arrows to highlight " NAV Units" and press
.
Use the Up/Down arrows to highlight the unit of measure that you want and
press .
Press to return to the last screen viewed.
This completes the set up for your Meridian GPS receiver. The next chapter
will describe the basic operation and use of the Meridian as a navigation
tool.
.
When you are satisfied with the
.

Basic Operation

. Use the Up/Down arrows to
. Use the
. Use