Basic Operation; Map 330 Gps Receiver - Magellan MAP330 - MapSend CD For Meridian User Manual

For many of you this will be your first introduction into using a GPS receiver as a
navigational tool. With all of the features and functions provided with the MAP
330, it may seem a bit intimidating at first. Don't worry. There are only a few
things you need to know to use the MAP 330. They will be discussed here in
detail. Other features and functions can be found in the Reference Section of
this manual.
Quadrifilar Antenna
IN - Zooms in the
display of the Map
screen. (Press once
to zoom one level,
press and hold to
quickly move
through the zoom
levels.)
ESC- Cancels the
operation of the last
button pressed.
Also scrolls through
the NAV screens in
reverse order.
NAV - Accesses the
various navigation
screens.
MARK/GOTO - MARK
is used to create a
waypoint. GOTO is
used to create a
direct route to any
waypoint stored in
memory.
Magellan MAP 330 GPS Receiver

Basic Operation

Basic Operation
OUT - Zooms out
the display of the
Map screen. (Press
once to zoom one
level, press and hold
to quickly move
through the zoom
levels.)
ENTER - Confirms
data entries or menu
selections.
MENU - Accesses
menus for displayed
screens. Also
provides access to
waypoint, route and
setup functions.
Power/Light- Turns the
MAP 330 on/off. Also used
to turn the display
backlight on/off.
9