CARE AND CLEANING
CLEANING THE LINT FILTER
The lint fi lter must be cleaned after each load.
1. Grasp the fi lter holder handle and pull it towards you
to open the lint fi lter.
2. Open the lint fi lter. Use your thumb to press on the
edge as illustrated and pull it out.
3. Use your hand or a soft cloth to remove the lint from
all sides of the fi lter. If necessary, use a damp sponge
and a small amount of washing-up liquid to remove
any deposits. Dry the fi lter thoroughly with a towel.
NOTE!
Clean the surface of the lint (fl uf) fi lter after each drying
program.
4. To close the lint fi lter, follow the reverse order of steps
used for opening. Then, replace the fi lter by sliding it
back into the door. Close the lint fi lter before closing
the door.
13