Turning The Nav Screens On/Off; Selecting The Coordinate System - Magellan 330 Series User Manual

Reference
Reference
Turning NAV Screens On/Off — Allows you to turn off or on any of the
navigation screens you choose.
From
Any
Screen
Sat Status
(Note: you must go through the entire sequence of nav screens for your
selections to be saved. As an example, if you turn the Sat Status screen
off and press ESC before confirming all of the nav screens, your
selection will not be saved and the Sat Status screen will still be on.)
Default: All On
Selecting the Coordinate System — Allows you to set the coordinate
system that will be used to display the position for the primary or
secondary position screen. Available coordinate systems are: Lat/Lon,
UTM, OSGB, Irish, Swiss, Swedish, Finnish, German, French, or User
Grid.
From
Any
Screen
Default: Primary - Lat/Lon
52
Highlight
Setup
Compass
On/Off On/Off
Position
On/Off
Highlight
Setup
Select Primary or Select Coordinate
Secondary
The coordinate system you select
may require additional
information.
DEG.MIN.MMM
Secondary - UTM
Highlight
Nav Screens
Large Font
On/Off
Highlight
Coord System
System
Magellan MAP 330 GPS Receiver