Programming Of Wheelchair; Storing Of Wheelchair - Invacare G40 Service Manual

14.0 Programming of wheelchair

For trouble diagnostics of ACS-electronic and for adjustment of standard or customer-specific driving profiles
the DYNAMIC wizard PCD-software version 2.0 should be used.
• P rogramming
• C onfiguration
• D iagnostics
The programme makes possible diagnosis and adjustment with the help of a commercially available PC up
from modelrow 386 SX with the operating systems DOS (up from version 3.1) or Windows 95.
Beyond that a PC-independent programming instrument can be used.
The article number of software or the programming instrument can be found in chapter 2.0 list of tools.
You can get more information to PCD-software or the programming instrument at INVACARE-service,????????

15.0 Storing of wheelchair

If it is necessary to store the wheelchair for a longer period you should do following actions:
• Check tyre pressure and fill up to rated pressure if necessary. See chapter 8.2.
• Load batteries for 48 hours with INVACARE-charging unit. See chapter 10.2.
• Remove pole clips of batteries. See chapter 10.1.
• Store batteries in a cool place (if necessary disassemble and store separately). See chapter 10.1.
During renewed putting it into operation check tyre pressure and battery voltage and fill in / load if necessary.
39