Checks And Repair Work At Chassis; Chassis Covering, Grips And Cover Coating20 - Invacare G40 Service Manual

8.0 Checks and repair work at chassis

8.1 Chassiscovering, grips and cover coating
Chassiscovering
3
1 Chassiscovering
4 Rosettes
7 Brake lever
10 Hexagon head screw
Check
• Cover coating loose or damaged?
• Side grip or rosette damaged?
• Chassiscovering damaged?
• Stick holder damaged?
Disassembly side grip
• Bring seat system in service position and arrest.
• Remove caps (9), remove hexagon head screws (10) with discs (11) and take off grip (2) with rosettes
(4).
Assembly
• Assembly is carried out in reverse order.
disassembly chassiscovering
NOTE:
Before thedisassembly of chassiscovering you first must disassemble the seat system completely.
See chapter 7.1 to 7.5.
• Remove hexagon head screws with nuts and take off stick holder (5).
• Release wing screw (8) and take off brake lever (7).
• Remove side grips (2) with rosettes (4).
• Remove the eight plastic rivets (6), two at sides, two at front, two at back.
For doing that you first must draw off the pins (in covering) with pliers out of the rivets.Then remove the
rivets from outside with a screwdriver.
• Take off chassiscovering from chassis upwards.
Assembly
• Assembly is carried out in reverse order.
20
7
8
4
2
6
1
5
2 Side grip
5 Stick holderr
8 Wing screw M6x10
11 Securing disc Schnorr M8
Side grip
2
9, 10, 11
3 Cover coating
6 Plastic rivet
9 Cap SKS 8
Action
> Stick or replace coating.
> Replace side grip or rosette.
> Replace chassiscovering.
> Replace stick holder.
9, 10, 11