Table of Contents
Advertisement
VC73410MUK Rev4_Instruction Book 31/10/2012 11:18 Page 7
Using the attachments in Lift Away canister mode
1
2
1
Press the handle release button
handle
(1)
up so the desired attachment can be
attached onto the end of the handle, or
2
Press the extension tube release button
pull the extension tube
attachment can be attached onto the end of
the extension tube.
•
NOTE: Attachments should only be used in
Lift Away canister mode, not in upright mode.
Fitting the Dust Away cleaning cloth
Use the Dust Away cleaning cloth to clean dry bare floor surfaces. Do not use to clean damp floors or
wet/sticky messes.
The Dust Away cleaning cloth
(31)
attaches to the Dust Away
floor attachment
(30)
velcro pads.
Wash the cleaning cloths seperately from other items with warm water either in the washing machine or
by hand using liquid detergent. Do not use bleach or fabric softeners as they damage or leave a coating
that will reduce the cleaning performance of the cleaning cloths. Tumble dry at low temperatures or line
dry to extend the life of the micro-fibre fabric.
The cleaning cloth should be washed after every use, and replaced every six months. Contact Morphy
Richards to purchase a replacement. Only use cleaning cloths provided by Morphy Richards, which are
designed to work with the Dust Away floor attachment.
(4)
and pull the
(9)
and
(8)
up so the desired
1
Slip two of the tabs between
the suction nozzle and the
with four
duster base and attach them to
the front fasteners on the base.
List of attachments
Dusting brush (28)
for delicate surfaces.
Crevice tool (26/27 depending on model)
awkward places, corners and behind radiators etc.
This tool is also useful on stairs.
Turbo nozzle (29) (certain models only)
human and pet hair removal from stairs and
upholstery.
Dust Away floor attachment (certain models only)
(30 and 31)
for use on hard floors (see below). The
Dust Away floor attachment attaches to the
extension tube
(8)
only.
(certain models only)
2
Pull the other two tabs tightly
around to the back fasteners on
the base. For best results,
ensure that the pad is flat
against the bottom surface and
secured tightly.
for
is ideal for
3
7 7
Advertisement
Table of Contents
