Using The Attachments On The Handheld Vacuum Cleaner; Emptying The Dust Canister; Tool Storage; Maintenance - Morphy Richards SuperVac User Manual

VC70485MUK Rev2_Instruction Booklet 28/07/2011 16:11 Page 5
Using the attachments on the
handheld vacuum cleaner
Push the accessories Î or Ï into the suction
1
inlet on the end of the handheld vacuum
cleaner J.
J
Alternatively, for extra reach, attach the
accessories together and push the assembly
into the suction inlet on the end of the
handheld vacuum cleaner K.
K
ATTACHMENTS
Crevice tool Î for awkward places, corners
and behind radiators etc. This tool is also
useful on stairs.
Upholstery nozzle Ï for carpet, upholstery
and stairs etc.
Dusting brush Ì for pelmets, delicate objects
(attaches to upholstery nozzle Ï).

Tool storage

When not in use, the attachments may be
stored on the charging cradle base. Assemble
the dusting brush onto the upholstery nozzle
and push them onto the crevice tool. Then
push this assembly onto the holder on the
charging cradle L.
L
For details of other Morphy Richards products, please see our website:
EMPTYING THE DUST
CANISTER
Empty the dust canister „ regularly even if it
does not look full, this will maintain the
performance.
1 Unplug the cleaner from the mains switch.
2 Remove the handheld vacuum cleaner from
the main vacuum cleaner body (see step 1 of
'Handheld vacuuming' section, page 4).
Press the dust canister release button ‚ and
3
pull the dust canister away from the handheld
vacuum cleaner M.
M
4 Remove the dust canister filter and empty the
dirt from inside the dust canister N.
N
5 If the filter is not washed as instructed overleaf
O, it is recommended that the filter is brushed
or tapped clean before refitting on each empty
of the dust canister.
6 Replace the filter into the dust canister, then
replace the dust canister back onto the
handheld vacuum cleaner.
7 Replace the handheld vacuum cleaner back
into the main vacuum cleaner body if upright
cleaning.

MAINTENANCE

WARNING: Always unplug the vacuum
cleaner from the mains supply before
undertaking any maintenance or cleaning
procedures.
Your cleaner is manufactured to withstand
normal day-to-day use, but an occasional wipe
over with a damp cloth will help maintain its
good looks. Take care not to get the electrical
connections wet.
Abrasive cleaners should not be used.
5