Table of Contents
Advertisement
VC734055MUK Rev 2.qxp_Instruction Book 08/03/2017 11:41 Page 6
Using in upright mode
Handheld vacuum cleaning
1
This function is ideal for cleaning stairs,
curtains and upholstery.
To separate the upright handle
handheld vacuum cleaner (13), press the
upright handle release buttons
the upright handle away from the handheld
vacuum cleaner.
2
To enhance the appearance, you may wish
to insert the upright handle connector hole
plug
(11a)
into the upright handle connector
hole (11b). This is optional.
To remove again, press the upright handle
release buttons
6
1
2
(2)
from the
(12)
and pull
(12)
and pull the plug out.
3
Assemble the product for upright vacuum cleaning
(see 'Assembly in upright mode', page 5).
IMPORTANT: When using the motorised floor
brush (20), never keep it in one location on the
floor for an extended period and do not leave the
product running whilst standing still. The rotating
brush bar could cause damage to some floor
coverings if the floor is exposed to the rotating
brush action for a continued period of time.
To attach the motorised floor brush
handheld vacuum cleaner (13), push the neck of
the motorised floor brush into the handheld
vacuum cleaner suction inlet
into place.
To separate the motorised floor brush from the
handheld vacuum cleaner, press the handheld
vacuum cleaner attachments release buttons
and pull the motorised floor brush away from the
handheld vacuum cleaner.
To use the crevice tool
(23)
motorised floor brush (20), align the ridges on
the side of the tool with the grooves inside the
handheld vacuum cleaner suction inlet
push in place until a click is heard. To remove it
again, press the handheld vacuum cleaner
attachments release buttons (17).
2
(20)
to the
(18)
until it clicks
(17)
in place of the
(18)
and
Hide quick links:
Advertisement
Table of Contents
