Summary of Contents for Morphy Richards Supervac gold
Page 1
VC731011MUK Rev1.qxp_Instruction Book 05/03/2020 10:44 Page 1 VC7310011MUK Rev1 * Register at www.morphyrichards.co.uk/support UK and Ireland customers only Cordless Vacuum Cleaner Please read and keep these instructions for future use IMPORTANT: Maintain your product to ensure optimum performance and product life. Please read the maintenance section thoroughly. The guarantee may be invalidated if the motor is damaged due to: using the appliance without the filter(s) installed;...
• Never modify the cleaner in any way. • Never touch the adaptor, product or cable with wet • Use only Morphy Richards spare parts and accessories. hands. Electrical requirements • Unprofessional repairs can be dangerous for users. •...
Page 4
VC731011MUK Rev1.qxp_Instruction Book 05/03/2020 10:44 Page 4 Storage mount fixing The storage mount (21) must be fixed to a suitable, strong wall. Two wall plugs for solid walls (eg brick) and compatible screws are included with the product. If your mounting wall is not a solid brick wall then other appropriate wall plugs/screws will need to be used.
VC731011MUK Rev1.qxp_Instruction Book 05/03/2020 10:44 Page 5 Set up and charging Charge the product fully before first use. Insert the mains adaptor connector (22) into the charging inlet on the side of the handheld vacuum cleaner (6). Connect the mains adaptor into the mains supply.
Page 6
VC731011MUK Rev1.qxp_Instruction Book 05/03/2020 10:44 Page 6 Switching on and power settings Assemble the product for upright vacuum cleaning (see ‘Upright vacuuming: assembly’). To switch ON, slide the On/Off button forward. At the first position the product will switch on at LOW power, push the slider again to the second position for HIGH power.
VC731011MUK Rev1.qxp_Instruction Book 05/03/2020 10:44 Page 7 Handheld vacuum cleaning Assemble the product for handstick vacuum For extra reach whilst cleaning high areas like cleaning (see ‘Upright vacuuming: assembly’, coving etc, use the crevice tool (25) or dusting page 5). brush / upholstery nozzle (24) in place of the...
VC731011MUK Rev1.qxp_Instruction Book 05/03/2020 10:44 Page 8 Using the attachments Crevice tool and brushes Dusting brush (24) for carpet, upholstery and stairs etc. Upholstery nozzle (24) for upholstery and bedding etc. Slide the dusting brush back by clicking the button on the attachment - this reveals the upholstery nozzle.
Page 9
VC731011MUK Rev1.qxp_Instruction Book 05/03/2020 10:44 Page 9 Remove the foam filter from the dust canister To refit the dust canister filter back into the filter (9). dust canister (10), a lign the rectangular holes on each part and slot the dust canister filter back into the dust canister.
VC731011MUK Rev1.qxp_Instruction Book 05/03/2020 10:44 Page 10 Pull away any hairs or fibres from around the Maintenance - motorised rotating brush bar (19a). If they are tightly wound floor brush around the brush carefully snip the fibres/hairs with scissors using the groove in the brush to WARNING: The motorised floor brush (19) assist.
Page 11
VC731011MUK Rev1.qxp_Instruction Book 05/03/2020 10:44 Page 11 • “Product not charging” Contact us Check the charge indicator lights on the top of the handheld vacuum cleaner are illuminating to Helpline indicate that charging is in process. If the indicators are not showing, check: a) the mains If you are having a problem with your appliance, adaptor (23)
Page 12
12 months when you register the product within the appliance must have been used according to the 28 days of purchase with Morphy Richards. If you do not instructions supplied. register the product with Morphy Richards within 28 days, This appliance is intended for domestic use only.