Troubleshooting; Specifications; Contact The Nespresso Club - Breville Pixie Clips BEC450 Instruction Manual

Table of Contents

Advertisement

TROUblESHOOTIng

No light.
➔ The machine has switched off automatically; press ON/OFF button.
➔ Check the mains: plug, voltage, fuse.
No coffee, no water.
➔ Check the water tank, if empty, fill with potable water. Descale it if necessary.
➔ Lift the lever. Press one coffee button and wait until water comes out.
Coffee is not hot enough.
➔ Preheat cup. Descale the machine if necessary.
The lever cannot be closed completely. ➔ Empty the capsule container/Check that there is not a capsule blocked inside the machine.
Leakage or unusual coffee flow.
➔ Check that the water tank is in position.
Lights flash irregularly.
➔ Call the Nespresso Club.
➔ Exit descaling procedure (see paragraph on descaling).
No coffee, water just comes out
➔ In case of difficulties, call the Nespresso Club.
(despite inserted capsule).
Machine switches itself off.
➔ To save energy the machine will turn itself off after 9 minutes of non use. See paragraph on «Energy
Front light is red.
➔ Water tank is empty or needs to be cleaned.
Pannel cannot be clipped.
➔ Ensure orientation as indicated per the arrows inside the panel. Start to clip from the top.
16
saving concept».
In case the panel still does not clip, call the Nespresso Club.

SPECIFICaTIOnS

220-240 V, 50-60 Hz, <1260 W
max
19 bar
~ 3 kg
0.7 L
11.1 cm
23.5 cm
32.6 cm

COnTaCT THE Nespresso ClUb

For any additional information, in case of problems or
simply to seek advise, call the Nespresso Club. Contact
details of the Nespresso Club can be found in the
«Welcome to Nespresso» folder in your machine box or
at nespresso.com
In case of machine pick-up, please remove the
side panels and keep them safely.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents