Coffee Preparation - Breville Pixie Clips BEC450 Instruction Manual

COFFEE PREPaRaTIOn

1
Rinse then fill the water tank with potable water.
The water tank can be carried by its cover.
5
During heat up, you can press the coffee button
when it's still blinking. The coffee will then flow
automatically when the machine is ready.
10
2
Switch the machine on. Blinking light: heating up
for approximately 25 seconds. Steady light: ready.
6
For a Latte Macchiato glass fold the cup support
into the upright position. It will automatically fall
down again when removing the glass to avoid any
drips falling on to your kitchen surfaces.
3
Lift the lever completely and insert a
Nespresso capsule.
Never lift lever during operation and refer to the safety precautions to
avoid possible harm when operating the appliance
7
Press the Espresso (40 ml) or the Lungo
(110 ml) button. Preparation will stop
automatically. To stop the coffee flow or top up
your coffee, press again.
4
Close the lever and place a cup under the coffee
outlet.
8
Take the cup. Lift and close the lever to eject the
capsule into the used capsule container.