New Proxyuser System Account; Xcp Issues And Workarounds; Known Issues And Workarounds In Xcp 1093 - Fujitsu SPARC Enterprise M3000 Product Notes

New proxyuser System Account

To support Active Directory and LDAP/SSL, this release features a new system
account named proxyuser. Verify that no user account of that name already exists.
If one does, use the deleteuser(8) command to remove it, then reset XSCF before
using the Active Directory or LDAP/SSL feature.

XCP Issues and Workarounds

This section contains information about XCP issues.
issues you might encounter, depending upon which XCP release you are using.

Known Issues and Workarounds in XCP 1093

TABLE 4
Known Issues and Workarounds in XCP
TABLE 4
ID Description
RTIF1- In setsnmp addv3traphost, when the
080725-001 authentication failed due to the reasons such
as the trap host not working, or the wrong
user name or password, the subsequent SNMP
traps will not be notified.
RTIF1- When the SNMPv3 trap has been set, after the
080725-002 watchdog timeout occurred in XSCF and XSCF
reset, the subsequent SNMP traps will not be
notified.
RTIF1- When FRUs are cold-replaced (with the system
081016-002 off), (after poweron) the monitor process
might not generate entries in the monitor
message log identifying the replacement
operation that has occurred.
RTIF1- In the settimezone -c adddst command,
081225-001 when you set eight or more letters to the
abbreviation of time zone and the name of
Daylight Saving Time, execution of the
showlogs command induces a segmentation
fault and results in an error.
lists known XCP issues and possible workarounds in XCP 1093.
TABLE 4
1093
Workaround
No workaround is available.
Confirm that the SNMP trap host is working
and re-execute the setsnmp(8) command
using the correct user name.
Reset the XSCF.
No workaround is available.
Specify the abbreviation of time zone and the
name of Daylight Saving Time in seven letters
or less.
, , and
TABLE 5 TABLE 6
Information About Software
list
17