Preset
Auto tour
Assistant
Matrix
Light and wiper
In
F igure 7-12
, you can input pattern value and then click start record
X 4 4 0 H 4 4 0 H 4 4 0 H
X
button to begin PTZ movement. Please go back to Figure 7-11 to
implement camera operation. Then you can click stop record button.
Now you have set one pattern.
In
F igure 7-12
, move the camera to your desired location and then input
X 4 4 1 H 4 4 1 H 4 4 1 H
X
preset value. Click add button, you have set one preset.
In
F igure 7-12
, input auto tour value and preset value. Click add button,
X 4 4 2 H 4 4 2 H 4 4 2 H
X
you have added one preset in the tour.
Repeat the above procedures you can add more presets in one tour.
You can select the assistant item from the dropdown list. See
7-13
.
X
This series product supports matrix extension function. You can control
the video input and
If your PTZ protocol supports the light and wiper control function. You
can enable/disable the light or the wiper.
output switch
F igure
X 4 4 3 H 4 4 3 H 4 4 3 H
144