Activate Pattern Function; Border Setup; Figure 6- 8 Pattern Setting - Honeywell CADVR-04D User Manual

Activate Pattern Function

Border Setup

Please go to F igure 6-2
X 4 1 7 H 4 1 7 H 4 1 7 H
F igure 6-9 and click end button.
X 4 1 8 H 4 1 8 H 4 1 8 H X
You can memorize all these setups as pattern 1.

Figure 6- 8 Pattern Setting

In F igure 6-6 input mode value in the No. blank, and click pattern button.
X 4 1 9 H 4 1 9 H 4 1 9 H X
In F igure 6-5 , click border button. The interface is shown as in
X 4 2 0 H 4 2 0 H 4 2 0 H X
6-10 .
X
Please go to F igure 6-2
X 4 2 2 H 4 2 2 H 4 2 2 H
and then please go to
Repeat the above procedures to set right limit.
to modify zoom, focus, and iris. Go back to
X
, use direction arrows to select camera left limit,
X
F igure 6-10 and click left limit button
X 4 2 3 H 4 2 3 H 4 2 3 H X
F igure
X 4 2 1 H 4 2 1 H 4 2 1 H
132