Activate Patrol (Tour); Pattern Setup; Activate Pattern Function; Auto Scan Setup - Honeywell HD-16DVR-C User Manual

Activate Patrol (tour)

Pattern Setup

Activate Pattern Function

Auto Scan Setup

In Figure 4-30, input the patrol (tour) number in the No. blank and click the
patrol button.
In Figure 4-30, click Pattern and then click "begin. The interface is shown
as in Figure 4-34. Then you can go to
and iris.
Go back to Figure 4-34
operations as pattern 1.

Figure 4-34 Pattern Setup

In Figure 4-31, input a mode value in the "No." field, and click Pattern.
In Figure 4-30, click Border. The interface is shown in
Please go to Figure 4-29, use direction arrows to select camera left limit.
Then please go to Figure 4-35
Repeat the above procedures to set right limit.
Figure 4-29
and click End. You can memorize all these
and click left limit button
Honeywell
to modify zoom, focus,
Figure 4-27.
55