The Guidance View - TomTom GO Mobile Reference Manual

1. Back button. This button returns the map to an overview of your whole route or, if no route is
planned, moves the map to put your current location at the centre.
2. Switch view button. Select the switch view button to change between the map view and the
guidance view. When in map view, if you are driving, the small arrow rotates to show you your
current driving direction, with north being up.
3. Zoom buttons. Select the zoom buttons to zoom in and out.
4. Current location. This symbol shows your current location. Select it to add it to My Places or
search near your current location.
Note: If your device cannot find your location using GPS or other methods, the symbol appears
grey.
5. Selected location. Press and hold to
to show options for the location, or select the drive button to plan a route to the location.
6. Main Menu button. Select the button to open the
7. Map symbols. Symbols are used on the map to show your destination and your saved places:

Your destination.

Your home location. You can set your home location in

A stop

A location saved in
Select a map symbol to open the pop-up menu, then select the menu button to see a list of actions
you can take.
8. Traffic information. Select the traffic incident to display information about the
9. Your route, if you have
stop or save changes to your route.
10. Speed cameras on your route. Select a
11. Route bar. The route bar is shown when you have planned a route.

The guidance view

The guidance view is used to guide you along the route to your destination. The guidance view is
shown when you start driving. You see your current location and details along your route, including 3D
buildings in some cities.
The guidance view is normally in 3D. To show a 2D map with the map moving in your direction of
travel, change the 2D and 3D default
Tip: When you have planned a route and the 3D guidance view is shown, select the switch view
button to change to the
select a location
on your route.
My Places.
planned a route. Select the route to clear it, change the route type, add a
speed camera
settings.
map view and use the interactive features.
on the map. Select the pop-up menu button
Main Menu.
to display information about that camera.
16
My Places.
traffic delay.