Settings; Appearance; Arrival Information Panel - TomTom GO Mobile Reference Manual

Settings

Appearance

Select Settings in the Main Menu, then select Appearance.
On this screen, you can change these settings:

Switch to night colours when dark
Select this setting to make the device automatically switch to night colours when it gets dark.

Show previews of motorway exits
Select this setting to control the full screen preview when you approach motorway exits.

Switch map view
By default, automatic changing of views is on. This means, for example, that the device shows the
map view when an alternative route is being suggested, along with several other sets of circum-
stances. Also, for example, that the device shows the guidance view when you start driving and
you start to accelerate. Select this setting if you want to turn off automatic changing between
guidance view and map view.

Guidance view
Select this setting to choose from 3D or 2D versions of the guidance view. Both the 2D and 3D
guidance views move in your direction of travel.

Arrival information panel

Select Settings in the Main Menu, then select Appearance.
Select Arrival information to change the following settings:

Show remaining distance
Select this setting to show the remaining distance left to travel in the arrival information panel
during navigation.

Show remaining time
Select this setting to show the remaining time left to travel in the arrival information panel during
navigation.

Switch between distance and time automatically
Select this setting to control the automatic switching between remaining distance and remaining
time in the arrival information panel.

Show arrival information for
Use this setting to control whether you want to see information about the destination or the next
stop in the arrival information panel.
73