Setting An Anchor Channel - Roland M-5000 Reference Manual

Fader Bank Section

Setting an Anchor Channel

1.
Press the [FUNC] button.
All fader banks and assignable fader sections change to the
Function Selection mode. Selectable functions are shown on the
fader display.
2.
Select "SET ANCHOR". (Press the corresponding [SEL]
button.)
The M-5000 switches to the SET ANCHOR mode.
3.
Press the [SEL] button for the fader which you want to set
an anchor to apply a check mark (ASSIGN )).
4.
Press the [FUNC] button to exit the Function mode.
126