Modulation; Stereo Chorus; Stereo Flanger - Roland M-5000 Reference Manual

About Effect Types

Modulation

In modulation-type effects, raising the feedback value will make the
sound richer and more spacious.
Negative values will invert the phase.

STEREO CHORUS

DIR SW
Input L
Chorus L
Chorus R
Input R DIR SW
This is a stereo-in, stereo-out chorus. It lets you apply chorus
without impairing the position of the sound image that's been set
for the stereo input, by panning or other means.
EFFECT ON Turns the effect sound on/off
DIRECT ON Turns the unprocessed sound on/off
RATE
Chorus rate
DEPTH Chorus depth
PRE DELAY Time until the chorus sound is output
X-MIX Mix amount for the opposite-side chorus
LEVEL Chorus level
148
Output L
EFF SW
XMIX
EFF SW
Output R

STEREO FLANGER

DIR SW
Input L
Input R DIR SW
This is a stereo-in, stereo-out flanger. It lets you apply flanging
without impairing the position of the sound image that's been set
for the stereo input, by panning or other means.
EFFECT ON Turns the effect sound on/off
DIRECT ON
Turns the unprocessed sound on/off
RATE Flanger rate
DEPTH Flanger depth
Center frequency at which the flanger effect is
MANUAL
applied
LFO PHASE Phase difference between L and R for the LFO
Amount of flanger sound that is returned to the
FEEDBACK
input of the flanger
Amount of flanger sound that is returned to the
X-FEEDBACK
opposite-side input of the flanger
LEVEL Flanger level
Output L
EFF SW
FB
Flanger L
XFB
Flanger R
FB
EFF SW
Output R