Panasonic KX-TDA50 Programming Manual page 695

D
Data Line Security
• 2.8.8 [2-6-1] Numbering Plan—Main—Features—Data Line Security Set / Cancel
• 2.10.1 [4-1-1] Wired Extension—Extension Settings—Option 2—Data Mode
Feature Manual Reference
1.4.2 Dial Mode Selection
Dial Mode Selection
• 2.7.11 [1-1] Slot—LCO Port
– Dialing Mode
– DTMF Width
– Pulse Speed
• 2.7.17 [1-1] Slot—T1 Port (KX-TDA100/KX-TDA200/KX-TDA600 only)
– CO Dial Mode
– DTMF Width
– CO Pulse Speed
Feature Manual Reference
1.4.1 Data Line Security
Dial Tone
• 2.8.17 [2-9] System Options—Option 3
– Dial Tone—Distinctive Dial Tone
– Dial Tone—Dial Tone for Extension
– Dial Tone—Dial Tone for ARS
Feature Manual Reference
1.4.3 Dial Tone
Dial Tone Transfer
• 2.10.5 [4-1-4] Wired Extension—Flexible Button
– Type
– Parameter Selection (for TRS Level Change)
• 2.10.13 [4-2-3] Portable Station—Flexible Button
– Type
– Parameter Selection (for TRS Level Change)
• 2.10.17 [4-3] DSS Console—Flexible Button
– Type
– Parameter Selection (for TRS Level Change)
Feature Manual Reference
1.4.4 Dial Tone Transfer
DID (Direct Inward Dialing)
• 2.8.4 [2-3] Timers & Counters—Miscellaneous—Receiving Dial Inter-digit Timer—DID (KX-
TDA100/KX-TDA200/KX-TDA600 only)
• 2.16.2 [10-2] DIL Table & Port Settings—DID/TIE
3.2 Feature Programming References
PC Programming Manual 695