Utility-Ps Information - Panasonic KX-TDA50 Programming Manual

2.5 Utility
Item
Status
Version
Revision
CSID
Path
Group Call
To view CS information
1.
From the Utility menu, select CS Information.
2.
From the Target CSI/F Slot No drop-down list, select the target slot.
• To display information on a single card, select the slot number and name of that card.
• To display information on all matching cards, select "ALL".
3.
From the Interval Timer drop-down list, select the number of seconds between each automatic
screen refresh.
4.
Click Start to begin monitoring.
Monitoring will be performed and the screen will refresh according to the interval specified.
To refresh the screen manually at any time, click Refresh.
5.
Click Stop to end monitoring.
2.5.15 Utility—PS Information
Displays Portable Station (PS) registration information, including the associated Cell Station (CS).
This option is only available at Installer level.
The displayed items are as follows:
Item
PS No.
Extension Number
Location—Slot
Location—Port
64 PC Programming Manual
Description
Service status of the attached CS: INS, OUS, or FAULT.
If the status is FAULT, subsequent data items for that port will be left
blank.
Version number of the program file stored in the CS
Revision number of the program file stored in the CS
12-digit ID number of the CS
Number of the wireless extension currently using each path. In the
case of a group, several extensions may be using the same floating
extension number.
When an extension number is not registered, the display shows
"OFF". PSs can use up to 3 paths (KX-TDA100/KX-TDA200/KX-
TDA600) or 2 paths (KX-TDA50).
Number of PSs registered to the attached CS that are members of
a PS Ring Group.
Description
PS location number.
Only registered PSs will be displayed.
Extension number of the PS.
Slot number of the CS that the PS is registered with.
Port number of the CS that the PS is registered with.