Utility-Sd Card File Delete; Utility-Message File Transfer Pc To Pbx; Utility-Message File Transfer Pbx To Pc - Panasonic KX-TDA50 Programming Manual

2.5 Utility
2.5.5 Utility—SD Card File Delete
Allows you to delete files from the SD memory card.
This option is only available at Installer level.
The following essential system files cannot be deleted by this utility:
KX-TDA50: PSMPR, DSSYS, DSKEYSD
KX-TDA100/KX-TDA200: PMPR, DSYS, DKEYSD
KX-TDA600: PLMPR, DLSYS, DLKEYSD
To delete files from the SD memory card
1.
From the Utility menu, select SD Card File Delete.
2.
Click on the file to be deleted.
3.
Click Delete.
A confirmation screen will be displayed.
4.
Click OK.
The display will return to the SD Card File Delete screen.
2.5.6 Utility—Message File Transfer PC to PBX
Transfers Outgoing Message (OGM) files from the PC to the selected MSG card.
This option is only available at Installer level, and requires that at least 1 MSG card is installed. For
the KX-TDA100/KX-TDA200/KX-TDA600, the OPB card that it is mounted on must be set to OUS
status. For the KX-TDA50, the MSG card must be set to OUS status.
Files are stored on the MSG card in the location specified by the file's header information. Uploaded
files are automatically renamed as necessary. If this location already contains an OGM, it will be
overwritten by the newly uploaded message.
To transfer OGMs to an MSG card
1.
From the Utility menu, select Message File Transfer PC to PBX.
2.
Select the target MSG card from the drop-down list, and click OK.
The Open dialog box will be displayed.
3.
Select the message files to upload.
It is possible to select multiple files.
4.
Click OK.
The files will be uploaded. Files that do not contain message data will be ignored.
When complete, the display will return to the main screen.
2.5.7 Utility—Message File Transfer PBX to PC
Transfers Outgoing Message (OGM) files from the MSG card to the PC.
This option is only available at Installer level, and requires that at least 1 MSG card is installed. For
the KX-TDA100/KX-TDA200/KX-TDA600, the OPB card that it is mounted on must be set to OUS
status. For the KX-TDA50, the MSG card must be set to OUS status.
58 PC Programming Manual