Status
Indicates whether a certain PS is registered (reference only).
Default
None
Value Range
None, Registered
Maintenance Console Location
2.7.31 [1-2] Portable Station
Programming Manual References
None
Feature Manual References
1.13.24 PS Connection
2.7.32 [1-3] Option
System options can be programmed.
It is possible to clear the master CS information (Master CS Port and Radio System ID) by following
the procedure below in batch mode:
1.
Click Clear Master CS.
2.
Click Yes. To abort the procedure, click No.
If the system data is downloaded to the PBX after the master CS information has been cleared, it is
necessary to register all PSs again in the interactive mode. Master CS information will be assigned
automatically when a CS is connected to the PBX. Without the Radio System ID, PSs cannot be
registered.
System Wireless—System ID
Indicates the radio system ID used to register a PS (reference only).
Default
Not stored.
Value Range
Not applicable.
Maintenance Console Location
2.7.32 [1-3] Option
Programming Manual References
None
2.7 [1] Configuration
PC Programming Manual
217