Alarm; Set An Alarm; Alarm Alert - VTech BM3500 User Manual

• patrol Mode - The parent unit patrols to display images from
different baby units in every 7 seconds. You may change to view
images from different baby units even though the scanning period
is not expired by pressing
4. Press to confirm your selection.
Note
Monitoring mode is not applicable when there is only one baby unit.
4.4

Alarm

4.4.1

Set an Alarm

You can set an alarm on the parent unit as a reminder.
To set an alarm on the parent unit:
1. Press when the parent unit is not in use.
2. Press or
3. Press or
then press
4. Press or
minute slots.
5. Press or
6. Press or
confirm your selection.
4.4.2

Alarm Alert

You can set whether the parent unit beeps whenever the
alarm time arrives.
To set the alarm alert of the baby unit:
1. Press when the parent unit is not in use.
2. Press or
3. Press or
4. Press or
selection
to choose ALArM, then press
to choose the an alarm slot (Alarm 1 to Alarm 3),
.
to select the hour, then press
to select the minute, then press
to choose Once, Daily, or Off, then press
to choose ALArM, then press
to choose Alert.
to choose On or Off, then press
in this mode.
28
.
to proceed to the
.
to
.
to confirm your