Set Date And Time; Monitoring Mode - VTech BM3500 User Manual

4.2.3

Set Date and Time

You can set the date and time according to the formats you set.
To set the date and time on the parent unit:
1. Press when the parent unit is not in use.
2. Press or
3. Press or
4. Press or
month slots.
5. Press or
year slots.
6. Press or
hour slots.
7. Press or
minute slots.
8. Press or
selection.
4.3

Monitoring Mode

You can choose to monitor in Single Baby Unit, Split Baby
Unit or patrol Mode if there are more than one baby units in
your system (purchased separately).
To change the monitoring mode:
1. Press when the parent unit is not in use.
2. Press or
3. Press or
Mode.
• Single Baby Unit - Press
The parent unit only displays image of one baby unit. You may
change to view images from different baby units by pressing
in this mode.
• Split Baby Unit - The parent unit displays multiple baby unit
images in a maximum of four in one screen.
to choose DATE & TIME, then press
to choose Set Date & Time, then press
to select the date, then press
to select the month, then press
to select the year, then press
to select the hour, then press
to select the minute, then press
to choose MONITOrING MODE, then press
to choose Single Baby Unit, Split Baby Unit or patrol
to proceed to the
to proceed to the
to proceed to the
or to choose a desired baby unit.
27
.
.
to proceed to the
to confirm your
.