Vibration; Sound-Activated Screen - VTech BM3500 User Manual

4.8

Vibration

You can set the parent unit to vibrate as soon as the
baby unit detects sounds which light up three sound level
indicators on the parent unit. The vibration setting is preset to
On if speaker is off.
To change the vibration setting:
1. Press when the parent unit is not in use.
2. Press or
3. Press or
• On if speaker is off - The parent unit vibrates once whenever
the baby units detect sounds which light up three sound level
indicators while the speaker of the parent unit is turned off.
• Always on - The parent unit vibrates once whenever the baby
units detect sounds which light up three sound level indicators.
• Off - The parent unit will not vibrate even if the baby units detect
sounds.
4. Press to confirm your selection.
Notes
• If you set the sensitivity level to Level 5 (Maximum) (see page 30), the baby
unit will be very sensitive and detect any sounds including background noises.
These background noises may disrupt the silence and prevent the vibration
feature to work properly.
• If you set the vibration setting to On if speaker off or Always on, the parent
unit will vibrate once when you turn the speaker off.
4.9

Sound-activated Screen

When the parent unit screen is turned off manually
(see page 39), you can set the screen to be turned on
automatically whenever there are sounds detected from the
baby units. The parent unit screen will turn off automatically
when no sounds are detected from the baby units within
50 seconds. The sound-activated screen is preset to Off.
To turn the sound-activated screen on or off:
1. Press when the parent unit is not in use.
2. Press or
3. Press or
selection.
to choose VIBrATION, then press
to choose On if speaker is off, Always on, or Off.
to choose SOUND ACTIVATION.
to choose On or Off, then press
33
.
to confirm your