Event Record Setup; Sensor Setup - Samsung SVR-1630 User Manual

오류! 스타일이 정의되어 있지 않습니다.

5.4 Event Record Setup

This menu is to set the event recording conditions. It is necessary to set the "Event Record" menu to
"Yes" in "Schedule Record" to enable the SVR-1630 to record events, after the recording conditions
are set.
In addition, it is necessary to set "Event Source" before the Event Recording Setup.

5.4.1 Sensor Setup

This menu is to set the presence and types of input sensor.
The sensors support two types: Normal Open (N.O.) and Normal Close (N.C.).
Configuration Status
This indicates the status of recording conditions. If you set the recording conditions only to All Ch,
"Macro Setup" is displayed. If you change any one of the individual sensor settings, "Customer Setup" is
dislayed.
All ch
Sets all sensors to the same conditions. Select from Off/N.O./N.C. and press the "Apply" button.
Configuration
You can invididually set 16 sensors (S1~S16).
Samsung Techwin CO.,Ltd.
2004.07.2001 (v 1.0)
SVR-1630
39