The Following Should Always Be Observed For Safety - Hisense AMW2-20U4SNC1 Installation Manual

INSTALLATION MANUAL

1.THE FOLLOWING SHOULD ALWAYS BE OBSERVED FOR SAFETY

·Please provide an exclusive circuit for the air conditioner and make sure that no other electrical appliances are connected to it.
·Be sure to read <THE FOLLOWING SHOULD ALWAYS BE OBSERVED FOR SAFETY> before installing the air conditioner.
· Be sure to observe the caution specified here as they include important items related with safety.
· The indications and meanings are as follows.
WARNING: Could lead to death, serious injury, etc.
CAUTION: Could lead to serious injury in particular environments when operated incorrectly.
· After reading this manual, be sure to keep it together with the INSTRUCTION MANUAL in a handy place on the customer's site.
WARNING
·Dot not install the unit by yourself(customer).
Incomplete installation could cause injury due to fire, electric shock, the unit falling or leakage of water. Consult the dealer from
whom you purchased the unit or special installer.
·Install the unit securely in a place which can bear the weight of the unit.
When installed in an insufficient strong place, the unit could fall and cause injury.
·Use the specified wires to connect the indoor and outdoor units securely and attach the wires firmly to the terminal
block connecting sections so that the stress of the wires is not applied to the sections.
Incomplete connecting and fixing could cause fire.
·Do not use intermediate connection of the power cord or the extension cord and do not connect many devices to
one AC outlet.
It could cause a fire or an electric shock due to defective contact, defective insulation ,exceeding the permissible current, etc.
·Check that the refrigerant gas does not leak after installation has completed.
If refrigerant gas leaks indoors, and comes into contact with the fire of a fan heater, space heater, stove, etc., harmful substances
will be generated.
·Perform the installation securely referring to the installation manual.
Incomplete installation could cause a personal injury due to fire, electric shock, the unit falling or leakage of water.
·Perform electrical work according to the installation manual and be sure to use an exclusive circuit.
If the capacity of the power circuit is insufficient or there is insufficient electrical work ,it could result in a fire or an electric shock
·Attach the electrical cover to the indoor unit and the service panel to the outdoor unit securely.
If the electrical cover in the indoor unit and/or the service panel in the outdoor unit are not attached securely, it could result in
01