Advertisement
INSTALLATION MANUAL
WARNING
Be sure to comply with ``Technical Standards for Electrical Installation``, follow this manual and use special circuits for elec-
trical work. If there is a lack of circuit capacity or some deficiency in installation, it may cause a risk of electric shock.
Overcurrent might be produced may include DC substances. Be careful to choose the correct type of overcurrent protect-
ion switch.
WARNING
-Be sure to attach the valve cover of the outdoor unit securely, otherwise it may result in a fire or an electric shock from dust
or water.
-Use the indoor/outdoor unit connecting wire that meets the Standards to connect the indoor and outdoor units and fix the
wire to the terminal block securely so that no external force is conveyed to the connecting section of the terminal block.
Incomplete connections or fixing of the wire could result in a fire.
-Be sure to attach the terminal block cover on both indoor and outdoor units. If the terminal block cover is incorrectly attached,
it may cause a risk of fire or electric shock due to dust or water penetration.
-Be sure to use the power cord which type is more than 20A, otherwise it may result in a fire.
POWER TERMINAL
PANEL
1(L) 2(N) 3
1(L) 2(N)
4(SI)1(L) 2(N)
Cable clamp
To indoor unit A To indoor unit B
Power Cord
08
1.Remove the screw of
terminal cover.
2.Connect the wire and power
4(SI)
supply cable to the terminal
block.
3.Replace the terminal cover
securely.
Hide quick links:
Advertisement
