System Board - HP EliteDesk 700 G1 Maintenance And Service Manual

System board

Description
System board for use in models without Windows 8 (includes thermal material)
System board for use in models with Windows 8 Standard (includes thermal material)
System board for use in models with Windows 8 Professional (includes thermal material)
System board for use in models with NetClone (includes thermal material)
1. Prepare the computer for disassembly
2. Remove the access panel
3. When replacing the system board, make sure the following components are removed from the
defective system board and installed on the replacement system board:
Memory modules
●
Expansion cards
●
Fan sink
●
Processor
●
4.
Remove the fan duct from the chassis
5.
Rotate the drive cage to its upright position.
6.
Disconnect all data and power cables from the system board.
7. Remove the eight Torx screws (1) that secure the system board to the chassis.
66 Chapter 5 Removal and replacement procedures: Small Form Factor
(Access panel on page
(Memory on page
(Expansion card on page
(Fan sink on page 63)
(Processor on page 64)
(Preparation for disassembly on page
23).
28)
31)
(Fan duct on page 52).
22).