Display Radio Test Mode (Dual-Display Version); Table 5-2. Test-Mode Displays - Motorola APX 7000 Basic Service Manual

Performance Checks: Display Radio Test Mode (Dual-Display Version)
5.2

Display Radio Test Mode (Dual-Display Version)

This section provides instructions for performing tests in display radio test mode.
5.2.1 Access the Test Mode
To enter the display radio test mode:
1. Turn the radio on.
2. Within 10 seconds after "SELF TEST" is complete, press Side Button 2 five times in
succession.
The radio shows a series of displays that give information regarding various version numbers
and subscriber specific information. The displays are described in
Name of Display
Service
Host version
DSP version
Secure version
KGI algorithms name
(Encryption Type 1)
KG2 algorithms name
(Encryption Type 2)
KG3 algorithms name
(Encryption Type 3)
KG4 algorithms name
(Encryption Type 4)
KG5 algorithms name
(Encryption Type 5)
Model number
Serial number
ESN
ROM Size

Table 5-2. Test-Mode Displays

Description
The literal string indicates the radio has
entered test mode.
The version of host firmware is displayed.
The version of DSP firmware is displayed.
Version of the encryption software
Type of encryption being used
Type of encryption being used
Type of encryption being used
Type of encryption being used
Type of encryption being used
The radio's model number, as
programmed in the codeplug
The radio's serial number, as programmed
in the codeplug
The radio's unique electronic serial
number
The memory capacity of the host FLASH
part
Table 5-2.
Appears
Always
Always
Always
When the radio is secure
equipped
When the radio is secure
equipped
When the radio is secure
equipped and 2 or more
algorithms are loaded
When the radio is secure
equipped and 3 or more
algorithms are loaded
When the radio is secure
equipped and 4 or more
algorithms are loaded
When the radio is secure
equipped and 5 or more
algorithms are loaded
Always
Always
Always
Always
Sec 1: 5-3