Table of Contents
Advertisement
The preprogrammed Light/Flip button of the
accessories connected to the radio such as
Display Remote Speaker Microphone (DRSM)
is disabled when the radio is in Night Vision
Goggles (NVG) display mode.
Perform one of the following actions:
•
To toggle the backlight on or off, press the
preprogrammed Light/Flip button.
•
To turn the backlight on, press any key of the
keypad, the Menu Select or Navigation
button, or any programmable radio controls or
buttons.
Setting Up the Radio Display and Visual Indicators to
Suit Night Vision Goggles
During tactical nighttime operations of military entities
worldwide, the Night Vision Goggles (NVG) is used to
see in the dark. Your radio is 3rd generation NVG
compatible. When the radio is in NVG display mode,
the radio's front display and top display emit a very
low illumination backlight to allow the user to operate
the radio with the goggles on.
Caution:
Remove your NVG if you operate the radio in
non-NVG compatible display mode. Wearing
the NVG to operate in non-NVG compatible
display mode might injure your eyes.
Accessory connected to the radio that is in NVG
display mode such as Display Remote Speaker
Microphone (DRSM) has its backlight always in off
state.
Intelligent lighting indicators, TX LED and RX LED are
all disabled on both the radio and the connected
accessory when the radio is in NVG display mode.
Note:
Get familiar with your radio NVG feature and
operation before you use it with your Night
Vision Goggles.
The following methods are options on how to set up
the radio display and visual indicators. The result of
all the methods is the same. You can use the options
interchangeably depending on your preference and
the programmed functions.
Setting up the radio display and visual indicators
•
via the preprogrammed Profile button:
169
English
Advertisement
Table of Contents
