Setting Up The Radio Display And Visual Indicators To Suit Night Vision Goggles; Locking And Unlocking The Keypad And Controls; Turning Voice Mute On Or Off - Motorola SRX 2200 User Manual

68012005050-FY
Chapter 7: Advanced Features
7.21.5
Setting Up the Radio Display and Visual Indicators to
Suit Night Vision Goggles
When and where to use: During tactical nighttime operations of military entities worldwide, the Night Vision
Goggles (NVG) is used to see in the dark. Your radio is 3rd generation NVG compatible. When the radio is in
NVG display mode, the radio's front display and top display emit a very low illumination backlight to allow the
user to operate the radio with the goggles on.
CAUTION: Remove your NVG if you operate the radio in non-NVG compatible display mode. Wearing
the NVG to operate in non-NVG compatible display mode might injure your eyes.
Accessory connected to the radio that is in NVG display mode such as Display Remote Speaker Microphone
(DRSM) has its backlight always in off state.
Intelligent lighting indicators, TX LED and RX LED are all disabled on both the radio and the connected
accessory when the radio is in NVG display mode.
NOTE:
Get familiar with your radio NVG feature and operation before you use it with your Night Vision
Goggles.
Please refer to your agent or qualified radio technician to enable this feature through CPS configuration.
Procedure:
7.21.6

Locking and Unlocking the Keypad and Controls

You can lock the keypad, programmable buttons, rotary knobs, and switches of your radio to avoid
inadvertent entry.
Check with your dealer or qualified technician for best selection to suit your usage.
Procedure:
1. Toggle the programmed Keypad/Control Lock button or switch to on.
2. Toggle again to unlock the controls.
7.21.7

Turning Voice Mute On or Off

This feature allows you to mute the voice transmission of the current zone and channel.
When and where to use:
Procedure:
Turning Voice Mute off or on using the preprogrammed Voice Mute button:
a. To turn the feature off or on, press the preprogrammed Voice Mute button.
Result: The display shows momentary VMUT OFF, and you hear a short tone, indicating that the feature is
disabled or the display shows momentary VMUT ON, and you hear a short tone, indicating that the feature is
enabled.
74