Table of Contents
Advertisement
VGA :
Integrated in VT8606, supports CRT & TFT-LCD panels. HRS DF13-
20DP-1.25V (20 pin) 2 x connector on board for LVDS connection, 16-Pin
box-header on board for CRT connection. A 5-Pin box-header on board
provides the power of inverter. AVR ("RVRK11K1130206" ) is used to
control the brightness of LCD panel.
WATCHDOG :
I / O port 443H to Enable watchdog.
I / O port 441H to Disable watchdog.
Selectable for NMI or Reset function.
Time-out timing select 0 / 8 / 16 / 24 / 32 / 40 / 48 / 56 / 64 / 72 / 80 / 88 /
96 / 104 / 112 / 120 sec +/- 25%.
IDE INTERFACE :
1 EIDE(UDMA-33) onboard. 1 Compact Flash Type-II onboard.
FLOPPY DISK DRIVE INTERFACE :
One 26-pin connector.
Support for slim Floppy Disk Drive.
SERIAL PORT :
Four high speed 16550 Compatible UARTs with Send / Receive 16 Byte
FIFOs.
COM1 (D-Sub Connector) for RS-232;
COM2 (D-Sub Connector) for RS-232/422/485;
COM3 (D-Sub Connector) for RS-232
COM4 (D-Sub Connector) for RS-232.
COM1 contain 5V or 12V power capability with 9-pin D-sub connector on
rear panel. COM2/3/4 support 5V power only.
PARALLEL PORT :
One 25-pin D-Sub connector on rear panel.
Support for SPP, ECP, EPP Function.
Bi-directional parallel port.
PPC-7365F USER
'
S MANUAL
Chapter 1 Introduction
Page: 1-5
Advertisement
Table of Contents
