Clear Cmos Selection - Protech Systems PPC-7365F User Manual

Chapter 2 Hardware Configuration
2-26. CMOS FUNCTION SELECTION
JP8: CMOS Function Selection
The selections are as follows:
FUNCTION
NORMAL
(default)
CLEAR CMOS
To clear CMOS data, user must power-off the computer and set the jumper to
"Clear CMOS" as illustrated above. After five to six seconds, set the jumper back
to "Normal" and power-on the computer.
Page: 2-24
JUMPER SETTING
(pin closed)
1-2
2-3
JUMPER
ILLUSTRATION
PPC-7365F USER
'
S MANUAL