Integrated Peripherals - Protech Systems PPC-7365F User Manual

4-6. INTEGRATED PERIPHERALS

Choose〝INTEGRATED PERIPHERALS〞from the main setup menu, a
display will be shown on screen as below:
OnChip IDE Channel0
OnChip IDE Channel1
IDE Prefetch Mode
Primary Master PIO
Primary Slave PIO
Secondary Master PIO
Secondary Slave PIO
Primary Master UDMA
Primary Slave UDMA
Secondary Master UDMA
Secondary Slave UDMA
Init Display First
IDE HDD Block Mode
Onboard FDC Controller
Onboard Serial Port 1
Onboard Serial Port 2
Onboard Parallel Port
Onboard Parallel Mode
X ECP Mode Use DMA
X Parallel Port EPP Type
Onboard Parallel Port 3
Serial Port 3 Use IRQ
Onboard Serial Port 4
Serial Port 4 Use IRQ
IO Channel Check NMI
Watch Dog Timer Select
↑↓→←:Move Enter: Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5: Previous Values
By moving the cursor to the desired selection and by pressing the <F1> key,
the all options for the desired selection will be displayed for choice.
PPC-7365F USER
Phoenix – Award CMOS Setup Utility
Integrated Peripherals
F6:Fail-Safe Defaults
Integrated Peripherals Setup Screen
'
S MANUAL
Chapter 4 Award BIOS Setup
[Enabled]
[Enabled]
[Enabled]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Onboard VGA]
[Enabled]
[Enabled]
[3F8/IRQ4]
[2F8/IRQ3]
[378/IRQ7]
[Normal]
3
EPP1.9
[3E8]
[IRQ10]
[2E8]
[IRQ11]
[Disabled]
[Disabled]
F7:Optimized Defaults
Item Help
►
Menu Level
Page: 4-15