Engine speed
■
On hybrid vehicles, engine speed is precisely controlled in order to help improve fuel
efficiency and reduce exhaust emissions etc.
There are times when the engine speed that is displayed may differ even when vehicle
operation and driving conditions are the same.
Outside temperature display
■
In the following situations, the correct outside temperature may not be displayed, or the
●
display may take longer than normal to change.
• When stopped, or driving at low speeds (less than 12 mph [20 km/h])
• When the outside temperature has changed suddenly (at the entrance/exit of a
garage, tunnel, etc.)
When "--" or "E" is displayed, the system may be malfunctioning.
●
Take your vehicle to your Lexus dealer.
Customization
■
Settings (e.g. on/off operation of the ECO lamp) can be changed.
(Customizable features: P. 591)
NOTICE
To prevent damage to the engine and its components
■
Do not let the indicator needle of the tachometer enter the red zone, which indicates
●
the maximum engine speed.
The engine may be overheating if the high coolant temperature warning light comes
●
on or flashes. In this case, immediately stop the vehicle in a safe place, and check the
engine after it has cooled completely. (P. 565)
CT200h_OM_OM76134U_(U)
2. Instrument cluster
87
2