Turn signal lever
Operating instructions
Right turn
1
Lane change to the right (move the
2
lever partway and release it)
The right hand signals will flash 3 times.
Lane change to the left (move the
3
lever partway and release it)
The left hand signals will flash 3 times.
Left turn
4
Turn signals can be operated when
■
The power switch is in ON mode.
If the indicator flashes faster than usual
■
Check that a light bulb in the front or rear turn signal lights has not burned out.
If the turn signals stop flashing before a lane change has been performed
■
Operate the lever again.
Customization
■
The number of times the turn signals flash during a lane change can be changed.
(Customizable features: P. 591)
CT200h_OM_OM76134U_(U)
4-2. Driving procedures
167
4