Lexus 2015 CT200H Owner's Manual page 444

Hide thumbs Also See for 2015 CT200H:

Table of Contents

6-4. Using the other interior features

Press and hold the programmed

inside the vehicle) for 2 seconds

and release it. Repeat this

up to 3 times to complete pro-

If the garage door opener motor

activates when the HomeLink

ton is pressed, the garage door

Enabling 2-way communication with a garage door (only available for com-

patible devices)

When enabled, 2-way communication allows you to check the status of the

opening and closing of the garage door through indicators in your vehicle.

2-way communication is only available if the garage door opener motor used

is a compatible device. (To check device compatibility, refer to the Owner' s

manual supplied with the garage door opener motor.)

Press a programmed HomeLink

Within 1 minute of pressing the HomeLink

operation has stopped, press the "learn" or "smart" button on the garage

door opener motor. Within 5 seconds of the establishment of 2-way com-

munication with the garage door opener, both garage door operation indi-

cators in the vehicle will flash rapidly (green).

Reprogramming a single HomeLink

When the following procedure is performed, buttons which already have

devices registered to them can be overwritten:

With one hand, press and hold the desired HomeLink

When the HomeLink

(it takes 20 seconds for the HomeLink

CT200h_OM_OM76134U_(U)

(press/hold/release)

indicator starts flashing, continue to hold the

button and perform "Programming HomeLink

button to operate a garage door.

button, after the garage door

indicator to start flashing).

Troubleshooting