Lexus 2015 CT200H Owner's Manual page 589

Tire related term
Maximum load rating
Maximum permissible infla-
tion pressure
Measuring rim
Open splice
Outer diameter
Overall width
Passenger car tire
Ply
Ply separation
Pneumatic tire
Radial ply tire
Reinforced tire
Section width
Sidewall
Sidewall separation
Snow tire
CT200h_OM_OM76134U_(U)
Meaning
The load rating for a tire at the maximum permissible
inflation pressure for that tire
The maximum cold inflation pressure to which a tire may
be inflated
The rim on which a tire is fitted for physical dimension
requirements
Any parting at any junction of tread, sidewall, or inner-
liner that extends to cord material
The overall diameter of an inflated new tire
The linear distance between the exteriors of the side-
walls of an inflated tire, including elevations due to label-
ing, decorations, or protective bands or ribs
A tire intended for use on passenger cars, multipurpose
passenger vehicles, and trucks, that have a gross vehicle
weight rating (GVWR) of 10,000 lb. or less.
A layer of rubber-coated parallel cords
A parting of rubber compound between adjacent plies
A mechanical device made of rubber, chemicals, fabric
and steel or other materials, that, when mounted on an
automotive wheel, provides the traction and contains
the gas or fluid that sustains the load
A pneumatic tire in which the ply cords that extend to
the beads are laid at substantially 90 degrees to the
centerline of the tread
A tire designed to operate at higher loads and at higher
inflation pressures than the corresponding standard tire
The linear distance between the exteriors of the side-
walls of an inflated tire, excluding elevations due to
labeling, decoration, or protective bands
That portion of a tire between the tread and bead
The parting of the rubber compound from the cord
material in the sidewall
A tire that attains a traction index equal to or greater
than 110, compared to the ASTM E-1136 Standard Ref-
erence Test Tire, when using the snow traction test as
described in ASTM F-1805-00, Standard Test Method
for Single Wheel Driving Traction in a Straight Line on
Snow-and Ice-Covered Surfaces, and which is marked
with an Alpine Symbol (
589
9-1. Specifications
) on at least one sidewall
9